北京十三陵地区青白口系长龙山组含铁建造的发育特征及成因^*          下载免费PDF全文

张琴  王柏寒  周琛  孙祖宇  梅啸寒  原成帅  王凯 《古地理学报》2020,22(3):570-586

含铁建造在整个前寒武纪的地质记录中分布广泛,但针对华北地区青白口系长龙山组出露的含铁建造目前还没有报道。文中通过野外观察及室内XRD、SEM、ICP-MS等手段,对北京十三陵地区出露的长龙山组含铁建造的分布规律、矿物组成、成矿物质来源等开展研究,并探讨含铁建造的成因机制。结果表明,含铁建造的铁质主要为赤铁矿,与石英、海绿石等矿物伴生。含铁建造存在2种分布模式: Ⅰ型含铁建造,与海绿石伴生,产出厚度变化大(1~50 cm),偏光显微镜下海绿石砂岩和铁质条带呈互层状产出,赤铁矿具近球形结构;Ⅱ型含铁建造,无海绿石伴生,产出厚度相对较大(一般大于10 cm),镜下见黑色的富铁层夹碎屑石英透镜体,赤铁矿常发育针状或雪花状结构。依据构造演化和微量元素分析,认为含铁建造的铁质来源主要为下马岭组顶部的铁质风化壳。Ⅰ型含铁建造为化学胶体沉淀与海绿石风化的混合成因;Ⅱ型含铁建造主要属于胶体化学沉积成因,后期可能经受了糜棱化改造作用。这一结论为华北地区前寒武纪含铁建造的找矿提供了沉积地质依据,对于完善含铁建造成矿机理及华北地区元古代构造演化具有重要的意义。  相似文献   

Establishment of Numerical Wave Flume Based on the Second-Order Wave-Maker Theory     

Zhang  Hao-chen  Liu  Shu-xue  Li  Jin-xuan  Wang  Lei 《中国海洋工程》2019,33(2):160-171

With growing computational power, the first-order wave-maker theory has become well established and is widely used for numerical wave flumes. However, existing numerical models based on the first-order wave-maker theory lose accuracy as nonlinear effects become prominent. Because spurious harmonic waves and primary waves have different propagation velocities, waves simulated by using the first-order wave-maker theory have an unstable wave profile. In this paper, a numerical wave flume with a piston-type wave-maker based on the second-order wave-maker theory has been established. Dynamic mesh technique was developed. The boundary treatment for irregular wave simulation was specially dealt with. Comparisons of the free-surface elevations using the first-order and second-order wave-maker theory prove that second-order wave-maker theory can generate stable wave profiles in both the spatial and time domains. Harmonic analysis and spectral analysis were used to prove the superiority of the second-order wave-maker theory from other two aspects. To simulate irregular waves, the numerical flume was improved to solve the problem of the water depth variation due to low-frequency motion of the wave board. In summary, the new numerical flume using the second-order wave-maker theory can guarantee the accuracy of waves by adding an extra motion of the wave board. The boundary treatment method can provide a reference for the improvement of nonlinear numerical flume.  相似文献   

X波段雷达海面回波谱宽特征研究     

纪立佳  张彦敏  王运华  徐延东 《海洋学报》2019,41(7):149-158

海面电磁回波频谱宽度与海浪波高密切相关，可应用频谱宽度进行海浪有效波高反演。本文应用线性滤波法仿真出了海表散射面元在雷达视向上的投影速度，建立了回波谱宽模型，分析了雷达空间分辨率、回波时间序列长度及海洋环境参数等因素对频谱宽度的影响，同时还针对如何在实际观测过程中选择回波时间序列长度、观测方位角等参数进行了讨论。最后还将理论结果与CSIR-X波段雷达实测数据谱宽估计结果进行了比较。结果表明，剔除雷达噪声以及频率泄露的影响后，基于高斯分布标准偏差的谱宽估计方法所得结果与理论结果吻合很好，这从而证明了理论结果的可靠性。本文所得结果对海浪有效波高反演具有一定参考价值。  相似文献   

基于正交匹配追踪的声层析方法   总被引：2，自引：0，他引：2  

李倩倩  史娟  李整林  罗宇  阳凡林  张凯 《海洋学报(英文版)》2019,38(11):149-157

声速剖面的变化会对声传播产生较大的影响，经验正交函数模型经常用来实现对声速剖面数据的简化描述。然而在内波、湍流等海水不均匀性存在时，这种正则化操作会造成声速重构精度的大幅降低。本文利用字典学习生成声速剖面的非正交原子，在稀疏编码时采用正交匹配追踪（OMP，Orthogonal Matching Pursuit）算法，更新字典则使用KSVD （Kernel Singular Value Decomposition）的字典更新算法。由于字典学习不需要强制使用正交条件，对于训练数据更加灵活，从而可以使用少数的原子组合达到更高的重构精度。利用一次浅海声学实验多次测量的声速剖面研究了海水声速剖面的经验正交函数表示和字典学习，研究表明：相比于正交函数表示，学习字典可以利用少数原子（甚至一个原子）更好的解释声速剖面扰动。字典学习可以提高声速剖面的稀疏性，从而提高声速剖面的反演精度。  相似文献   

The galaxy luminosity function in the LAMOST Complete Spectroscopic Survey of Pointing Area at the Southern Galactic Cap     

Pin-Song Zhao  Hong Wu  Cong Kevin Xu  Ming Yang  Fan Yang  Yi-Nan Zhu  Man I Lam  Jun-Jie Jin  Hai-Long Yuan  Hao-Tong Zhang  Shi-Yin Shen  Jian-Rong Shi  A-Li Luo  Xue-Bing Wu  Yong-Heng Zhao  Yi-Peng Jing 《天文和天体物理学研究(英文版)》2019,(8)

We present optical luminosity functions(LFs) of galaxies in the~(0.1) g,~(0.1) r,~(0.1) i bands, calculated using data in~40 deg~2 sky area of the LAMOST Complete Spectroscopic Survey of Pointing Area(LaCoSSPAr) in the Southern Galactic Cap. Redshifts for galaxies brighter than r = 18.1 were obtained mainly with LAMOST. In each band, LFs derived using both parametric and non-parametric maximum likelihood methods agree well with each other. In the0.1 r band, our fitting parameters of the Schechter function are φ_*=(1.65 ± 0.36) × 10~(-2) h~3 Mpc~(-3), M_*=-20.69 ± 0.06 mag and α =-1.12 ± 0.08,which agree with previous studies. Separate LFs are also derived for emission line galaxies and absorption line galaxies. The LFs of absorption line galaxies show a dip at~(0.1) r ~18.5 and can be fitted well by a double-Gaussian function, suggesting a bimodality in passive galaxies.  相似文献   

Isolation and characterization of 49 polymorphic microsatellite loci for Decapterus maruadsi using SLAF-seq,and cross-amplification to related species     

Niu  Sufang  Zhai  Yun  Wu  Renxie  Zhang  Haoran  Tian  Letian  Deng  Jiaxin  Xiao  Yao 《中国海洋湖沼学报》2019,37(1):245-255

Decapterus maruadsi is a commercially important species in China, but has been heavily exploited in some areas. There is a growing need to develop microsatellites promoting its genetic research for the adequate management of this fishery resources. The recently developed specific-locus amplified fragment sequencing (SLAF-seq) is an efficient and high-resolution method for genome-wide microsatellite markers discovery. In this study, 28 905 microsatellites (mono- to hexa-nucleotide repeats) were identified using SLAF-seq technology, of which di-nucleotide was the most frequent (13 590, 47.02%), followed by mono-nucleotide (8 138, 28.15%), tri-nucleotide (5 727, 19.81%), tetra-nucleotide (1 104, 3.82%), pentanucleotide (234, 0.81%), and hexa-nucleotide (112, 0.39%). One hundred and thirty-two microsatellite loci (di- and tri-nucleotide) were randomly selected for amplification and polymorphism, of which 49 were highly polymorphic and well-resolved. The average number of alleles per locus was 13.63, ranging from 4 to 25, and allele sizes varied between 110 bp and 309 bp. The observed heterozygosity ( H_o ) and expected heterozygosity ( H_e ) ranged from 0.233 to 1.000 and from 0.374 to 0.959, with mean values of 0.738 and 0.836, respectively. The polymorphism information content (PIC) ranged from 0.341 to 0.941 (mean=0.806). However, 12 loci deviated from Hardy-Weinberg equilibrium. Furthermore, transferability tests were also successful in validating the utility of the developed markers in five phylogenetically related species of family Carangidae. A total of 48 microsatellite markers were successfully cross-amplified in Decapterus macarellus, Decapterus macrosoma, Decapterus kurroides, Trachurus japonicus, and Selaroides leptolepis. The present microsatellites provided the first known set of microsatellite DNA markers for D. maruadsi, D. macarellus, D. kurroides, and D. macrosoma, and would be useful for further population genetic and molecular phylogeny studies as well as help with the fisheries management formulation and implementation of the understudied species.

  相似文献   

硅灰加固宁波软土的试验研究     

王泽平  王常明  江南  张在恒 《岩土工程技术》2020,(2):111-116,121

为探索硅灰对软土的力学性质的影响,以宁波鄞州地区一种淤泥质黏土为试样,掺入不同量的硅灰,对硅灰加固土的力学性质和结构特征进行了测试。采用三轴不固结不排水剪切试验,测试分析了不同掺入量的硅灰加固土的应力应变关系,通过扫描电镜SEM照片分析了不同硅灰掺入量的硅灰加固土的结构特征。结果表明:(1)硅灰可以提高软土的黏聚力,黏聚力随着硅灰掺入量的增加而增大;(2)随着硅灰掺入量的增加,硅灰加固土的抗变形能力呈先增加后减小的趋势;(3)同一围压条件下,随着硅灰掺入量的增加,硅灰加固土的破坏偏应力逐渐增加;(4)随着硅灰掺入量的增加,硅灰加固土中大孔隙逐渐减少,小孔隙逐渐数量增加,孔径<1μm的小孔隙组分逐渐占优。  相似文献   

塔里木盆地玉北地区奥陶系储层成因研究     

张哨楠 《沉积与特提斯地质》2020,40(3):72-86

玉北地区奥陶系碳酸盐岩经历了加里东期和海西期构造作用的改造，东部断褶带和西部斜坡区断层发育，中部平台区断层不发育，导致勘探目的层鹰山组上部与鹰山组下部和蓬莱坝组储层发育特征的不同。鹰山组上部的储层主要受控于加里东期构造活动所造成的地层抬升暴露剥蚀，形成了以大气淡水溶蚀为主的储集空间类型；而鹰山组下部和蓬莱坝组储层则主要受到埋藏白云石化作用、硅化作用以及伴随着断层的形成而发育的裂缝和热液的改造作用的控制。氧碳同位素和⁸⁷Sr/⁸⁶Sr比值的分布特征也进一步证明了两种不同储层类型的主控因素。鹰山组上部洞穴中方解石的氧碳同位素值（δ¹⁸O_VPDB：-12～-4‰VPDB，δ¹³C：-3～1‰VPDB）比海水沉淀的方解石（δ¹⁸O_VPDB：-9.5～-7.5‰VPDB，δ¹³C：-1.5～0.5‰VPDB）在数值上明显偏负，说明洞穴中充填的方解石属于淡水成因。在鹰山组下部和蓬莱坝组白云岩储层中发育的鞍形白云石具有较低的氧同位素值（δ¹⁸O_VPDB：-10.7～-5.9‰VPDB）和高于海水的⁸⁷Sr/⁸⁶Sr值（均大于0.7094），因而被解释为热液成因，进一步说明这些地层中的溶蚀孔洞可能与热液改造有关。  相似文献   

Tectonic nature of the NE Asian continental margin during the Late Jurassic–Early Cretaceous: constraints from the geochronology and geochemistry of igneous rocks in the NE North China Craton     

Xiao-Ming Zhang  Chen-Yang Sun  Feng Wang  Yu Li 《International Geology Review》2020,62(15):1949-1970

ABSTRACT

This paper presents geochronological, geochemical, and zircon Hf–O isotope data for late Mesozoic intrusive rocks from the northeastern North China Craton (NCC), with the aim of constraining the late Mesozoic tectonic nature of the NE Asian continental margin. U–Pb zircon data indicate that the Late Mesozoic magmatism in the northeastern NCC can be subdivided into two stages: Late Jurassic (161 ? 156 Ma) and Early Cretaceous (125 ? 120 Ma). Late Jurassic magmatism consists mainly of monzogranites. These monzogranites display high Sr/Y ratios and the tetrad effect in their REE, respectively, and have negative ε_Hf(t) values (?22.6 to ?15.8). The former indicates that the primary magma was generated by partial melting of thickened NCC lower crust, the latter suggests that the monzogranites were crystallized from highly fractionated magma, with the primary magma derived from partial melting of lower continental crust. Combined with the spatial distribution and rock associations of the Late Jurassic granitoids, we conclude that the Late Jurassic magmatism in the eastern NCC formed in a compressional environment related to oblique subduction of the Paleo-Pacific Plate beneath the Eurasia. The Early Cretaceous magmatism consists mainly of granitoids and quartz diorites. The quartz diorites formed by mixing of melts derived from the mantle and lower crust. The coeval granitoids are classified as high-K calc-alkaline and metaluminous to weakly peraluminous series. Some of the granitoids are similar to A-type granites. The granitoid ε_Hf(t) values and T_DM2 range from ?14.3 to ?1.4 and 2089 to 1274 Ma, respectively. These values indicate that their primary magma was derived from partial melting of lower crustal material of the NCC, but with a contribution of mantle-derived material. We therefore conclude that Early Cretaceous magmatism in the northeastern NCC occurred in an extensional environment related to westward subduction of the Paleo-Pacific Plate beneath Eurasia.  相似文献   

Granulites record the tectonic evolution from collisional thickening to extensional thinning of the Tongbai orogen in central China     

Qiang-Qiang Zhang  Xiao-Ying Gao  Ren-Xu Chen  Yong-Fei Zheng 《Journal of Metamorphic Geology》2020,38(3):265-295

A combined study of petrology and geochemistry was carried out for granulites from the Tongbai orogen in central China. The results reveal the tectonic evolution from collisional thickening to extensional thinning of the lithosphere at the convergent plate boundary. Petrographic observations, zircon U–Pb dating, and pseudosection calculations indicate that the granulites underwent four metamorphic stages, which are categorized into two cycles. The first cycle occurred at 490–450 Ma and involves high-P (HP) metamorphism (M1) at 785–815°C and 10–14 kbar followed by decompressional heating to 840–880°C and 8–9 kbar for medium-pressure granulite facies metamorphism (M2), defining a clockwise P–T path. The high pressure is indicated by the occurrence of inclusions of rutile+kyanite+K-feldspar in the garnet mantle. The second cycle occurred at c. 440 Ma and shows an anticlockwise P–T path with continuous heating to ultrahigh-temperature (UHT) metamorphism (M3) at 890–980°C and 9–11 kbar, followed by decompressional cooling to 740–880°C and 7–9 kbar (M4) till 405 Ma. The HP metamorphism is synchronous with the ultrahigh-pressure eclogite facies metamorphism in the Qinling orogen, indicating its relevance to the continental collision in the Cambrian. The UHT metamorphism took place at reduced pressures, indicating thinning of the collision-thickened orogenic lithosphere. Therefore, the Tongbai orogen was initially thickened by the collisional orogeny and then thinned, possibly as a result of foundering of the orogenic root. Such tectonic evolution may be common in collisional orogens where compression during continental collision switched to extension during continental rifting.  相似文献